last updated Wednesday, May 17, 2000 5:01:44 PM.
© 2000 The Materials Research Society
Carmine A Carosella, Bela Molnar
Naval Research Laboratory
Stefanie Schiestel
George Washington University
James A Sprague
Naval Research Laboratory
This article was presented as part of Symposium W, "Gallium Nitride and Related Alloys" at the 1999 Fall Meeting of the Materials Research Society held in Boston, Massachusetts, November 28-December 3
The photoresist developer AZ-400K, commonly used to remove AlN encapsulant layers on GaN crystalline films, is found to also etch certain as-grown GaN films. Even as-grown GaN films, which can not be etched in AZ-400K, however can be etched if amorphized by ion implantation. Etch rates of as high as 450 Å/min. were observed. The etching proceeds linearly in GaN in the first few minutes to a depth corresponding to the depth of the amorphous region. Subsequently, the etching rate saturates. Annealing of the highly amorphized samples up to 100 °C for one minute in a N2/H2 gas mixture does not reduce the etch rate, but for lower doses we observed a reduction of the etch rate. Observations of etching depth under various ion-implanted conditions could be correlated with the number of displacements per atoms (dpa) required for amorphization.
Full text of this article is available.
For information about using Adobe Acrobat files, click here .
Cite this article as: MRS Internet J. Nitride Semicond. Res. 5S1, W11.70 (2000).
|
|
|
Reference List Building For information on building reference lists, see About the MIJ-NSR Reference List Builder |