last updated Wednesday, May 17, 2000 4:58:47 PM.
© 2000 The Materials Research Society
Maziar Farahmand, Kevin Brennan
Georgia Institute of Technology
This article was presented as part of Symposium W, "Gallium Nitride and Related Alloys" at the 1999 Fall Meeting of the Materials Research Society held in Boston, Massachusetts, November 28-December 3
The output characteristics, cutoff frequency, breakdown voltage and the transconductance of wurtzite and zincblende phase GaN MESFETs have been calculated using a self-consistent, full band Monte Carlo simulation. It is found that the calculated breakdown voltage for the wurtzite device is considerably higher than that calculated for a comparable GaN zincblende phase device. The zincblende device is calculated to have a higher transconductance and cutoff frequency than the wurtzite device. The higher breakdown voltage of the wurtzite phase device is attributed to the higher density of electronic states for this phase compared to the zincblende phase. The higher cutoff frequency and transconductance of the zincblende phase GaN device is attributed to more appreciable electron velocity overshoot for this phase compared to that for the wurtzite phase. The maximum cutoff frequency and transconductance of a 0.1 mm gate-length zincblende GaN MESFET are calculated to be 220GHz and 210 mS/mm, respectively. The corresponding quantities for the wurtzite GaN device are calculated to be 160GHz and 158 mS/mm.
Full text of this article is available.
For information about using Adobe Acrobat files, click here .
Cite this article as: MRS Internet J. Nitride Semicond. Res. 5S1, W11.13 (2000).
|
|
|
Reference List Building For information on building reference lists, see About the MIJ-NSR Reference List Builder |