last updated Wednesday, May 17, 2000 4:57:37 PM.
© 2000 The Materials Research Society
This article was presented as part of Symposium W, "Gallium Nitride and Related Alloys" at the 1999 Fall Meeting of the Materials Research Society held in Boston, Massachusetts, November 28-December 3
Defects can be conveniently categorized into three types: point, line, and areal. In GaN, the important point defects are vacancies and interstitials; the line defects are threading dislocations; and the areal defects are stacking faults. We have used electron irradiation to produce point defects, and temperature-dependent Hall-effect (TDH) and deep level transient spectroscopy (DLTS) measurements to study them. The TDH investigation has identified two point defects, an 0.06-eV donor and a deep acceptor, thought to be the N vacancy and interstitial, respectively. The DLTS study has found two point-defect electron traps, at 0.06 eV and 0.9 eV, respectively; the 0.06-eV trap actually has two components, with different capture kinetics. With respect to line defects, the DLTS spectrum in as-grown GaN includes an 0.45-eV electron trap, which has the characteristics of a dislocation, and the TDH measurements show that threading-edge dislocations are acceptor-like in n-type GaN. Finally, in samples grown by the hydride vapor phase technique, TDH measurements indicate a strongly n-type region at the GaN/Al2O3interface, which may be associated with stacking faults. All of the defects discussed above can have an influence on the dc and/or ac conductivity of GaN.
Full text of this article is available.
For information about using Adobe Acrobat files, click here .
Cite this article as: MRS Internet J. Nitride Semicond. Res. 5S1, W10.5 (2000).
|
|
|
Reference List Building For information on building reference lists, see About the MIJ-NSR Reference List Builder |