UV-Specific (320-365 nm) Digital Camera Based On a 128x128 Focal Plane Array of GaN/AlGaN p-i-n Photodiodes


J.D. Brown, J. Boney, J. Matthews, P. Srinivasan, J.F. Schetzina
North Carolina State University

Thomas Nohava, Wei Yang, Subash Krishnankutty
Honeywell Technology Center

This article was received on Wednesday, June 14, 2000 and accepted on Thursday, July 13, 2000.

Abstract

An ultraviolet-specific (320-365 nm) digital camera based on a 128x128 array of backside-illuminated GaN/AlGaN p-i-n photodiodes has been successfully developed. The diode structure consists of a base n-type layer of AlGaN (~23% Al) followed by undoped and then p-type GaN layers deposited by metal organic vapor phase epitaxy. Double-side polished sapphire wafers serve as transparent substrates. Standard photolithographic, etching, and metallization procedures were employed to fabricate the devices. The fully-processed photodiode array was hybridized to a silicon readout integrated circuit (ROIC) using In bump bonds for electrical contact. The UV camera was operated at room temperature at frame rates ranging from 15 to 240 Hz. A variety of UV scenes were successfully recorded with this configuration.

Outline

  • Introduction
  • Experimental Details
  • Photodiode Structure
  • Device Processing of Photodiode Arrays
  • Results and Discussion
  • Summary and Conclusions.
  • Acknowledgments
  • Linked Pages

    Cite this article as: MRS Internet J. Nitride Semicond. Res. 5, 6(2000).

    last updated Tuesday, November 7, 2000 4:54:20 PM.

    © 2000 The Materials Research Society MRS Internet Journal of Nitride Semiconductor Research